|
|
|
National Stock Number:
5310-01-326-9685
Federal Supply Class:
5310
National Item Identification Number:
013269685
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 16L004-91 | 81755 | LOCKHEED MARTIN CORPORATION | | 16L004-91 | T0544 | TUSAS HAVACILIK VE UZAY SAN.A.S. |
|
Techincal Specification:
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 FED SPEC SINGLE MATERIAL RESPONSE OR | | ASTM-D-3308 TYPE II GRADE 1 FED STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.660 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.178 INCHES MINIMUM AND | | 1.248 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.062 INCHES NOMINAL | | SPECIAL FEATURES | USE ON F-16 A/C T.O F16A-4-32 FIG10 INDEX 7A |
|
|