|
|
|
National Stock Number:
5310-01-328-2045
Federal Supply Class:
5310
National Item Identification Number:
013282045
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 9431-10-0050-500 PIECE 65 | 88773 | GEORGE W. DAHL INC. | | 9431-10-0050-500 PIECE 65 | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | NUT DIAMETER | 2.113 INCHES MINIMUM AND 2.115 INCHES MAXIMUM | | NUT LENGTH | 4.500 INCHES NOMINAL | | THREAD CLASS | 2B | | THREAD DIRECTION | LEFT-HAND | | THREAD LENGTH | 1.500 INCHES NOMINAL OVERALL | | THREAD QUANTITY PER INCH | 13 | | THREAD SERIES | UNC |
|
|