|
|
|
National Stock Number:
5310-01-332-7287
Federal Supply Class:
5310
National Item Identification Number:
013327287
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 4D0009C12 | 10630 | ANILLO INDUSTRIES LLC |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | RECESS ANGLE | 80.0 DEGREES NOMINAL | | RECESS DEPTH | 0.162 INCHES MINIMUM AND 0.168 INCHES MAXIMUM | | RECESS DIAMETER | 0.914 INCHES MINIMUM AND 0.924 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|