|
|
|
National Stock Number:
5310-01-333-8092
Federal Supply Class:
5310
National Item Identification Number:
013338092
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 270AS147 | 00994 | COLUMBUS JACK CORPORATION | | 270AS147 | 23808 | SUPERIOR COMPANIES, INC. | | 270AS147 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND OVERALL | | FLANGE DIAMETER | 3.250 INCHES NOMINAL | | FLANGE THICKNESS | 0.245 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE NOMINAL THREAD DIAMETER | 0.138 INCHES | | HOLE THREAD QUANTITY PER INCH | 40 | | HOLE TYPE AND QUANTITY | 4 TAPPED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-00825,TY 1 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4130H OR STEEL COMP 4135 OR STEEL COMP 4135H OVERALL | | NUT DIAMETER | 3.0005 INCHES MINIMUM AND 3.0015 INCHES MAXIMUM | | NUT LENGTH | 3.252 INCHES MINIMUM AND 3.258 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +2.2350 TO 2.3800 INCHES |
|
|