|
|
|
National Stock Number:
5310-01-338-7773
Federal Supply Class:
5310
National Item Identification Number:
013387773
Description:
WASHER,SHOULDERED
Detail:
A WASHER, ROUND IN SHAPE, AND HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT AND UNBROKEN, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
|
Manufacturer Information:
| M45595/1-13 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M45595/1-13 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM45595/1 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-W-45595/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D4066 ASSN STD 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.022 INCHES MINIMUM AND 0.032 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL | | SHOULDER HEIGHT | 0.049 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.422 INCHES MINIMUM AND 0.432 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDERED |
|
|