|
|
|
National Stock Number:
5310-01-358-8009
Federal Supply Class:
5310
National Item Identification Number:
013588009
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 393088-02 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 393088-02 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-184913 PIECE 1.4 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-184913 PIECE 1.4 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-184913 PIECE 28.4 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.660 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1018 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.190 INCHES NOMINAL | | THICKNESS | 0.120 INCHES NOMINAL |
|