|
|
|
National Stock Number:
5310-01-363-2886
Federal Supply Class:
5310
National Item Identification Number:
013632886
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 04-0002 ITEM 52 | 20019 | WARD LEONARD CT LLC | | 04-0060 ITEM NO 52 | 20019 | WARD LEONARD CT LLC | | 235A2310AF3 | 20019 | WARD LEONARD CT LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1009 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA366 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.800 INCHES MINIMUM AND | | 1.840 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 3.480 INCHES MINIMUM AND | | 3.520 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.063 INCHES NOMINAL |
|
|