|
|
|
National Stock Number:
5310-01-364-2560
Federal Supply Class:
5310
National Item Identification Number:
013642560
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 60325-036 | 33827 | BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC. | | 60325-036 | K0656 | BAE SYSTEMS (OPERATIONS) LIMITED |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.197 INCHES MINIMUM AND | | 0.199 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.313 INCHES NOMINAL | | RECESS DIAMETER | 0.225 INCHES NOMINAL | | MATERIAL THICKNESS | 0.032 INCHES MINIMUM AND | | 0.035 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|