|
|
|
National Stock Number:
5310-01-444-2973
Federal Supply Class:
5310
National Item Identification Number:
014442973
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3387C25H05 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 3387C25H05 | 34881 | DYNATHERM CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TY2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.253 INCHES MINIMUM AND | | 0.263 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.995 INCHES MINIMUM AND | | 1.005 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.245 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM |
|
|