|
|
|
National Stock Number:
5310-01-465-3724
Federal Supply Class:
5310
National Item Identification Number:
014653724
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| HS306-208L | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | HS306-208L | 10630 | ANILLO INDUSTRIES LLC | | HS306-208L | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | HS306-208L | 5H383 | PAC ZONAMATIC INC | | HS306-208L | 86928 | SEASTROM MANUFACTURING CO INC | | HS306-208L | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | OVERALL DIAMETER | 0.273 INCHES MINIMUM AND 0.293 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5518 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | STOCK IS COLD ROLLED 301 CRES, ONE-HALF HARD, 150 KSI TENSILE STRENGTH, 2B FINISH; 18CR - 8NI (SAE 30301); FITS NO. 2 SCREW | | THICKNESS | 0.016 INCHES NOMINAL |
|
|