|
|
|
National Stock Number:
5310-01-467-1358
Federal Supply Class:
5310
National Item Identification Number:
014671358
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4G13026-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | FEAT | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 3.010 INCHES MINIMUM AND 3.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 3.410 INCHES MINIMUM AND 3.430 INCHES MAXIMUM | | SPECIAL FEATURES | CRITICAL TO THE FUNCTION OF THE C-5 LANDING GEAR. ALL SPECIFIC ACTIONS, DIMENSIONS AND TOLERANCES PERTAINING TO THIS ITEM MUST BE MET TO ENSURE PROPER FUNCTION. ESA REQUIRES STRICT OVERSIGHT TO ENSURE THAT ALL TECH REQUIREMENTS ARE CURRENT | | THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
|
|