|
|
|
National Stock Number:
5310-01-467-2336
Federal Supply Class:
5310
National Item Identification Number:
014672336
Description:
WASHER,FLAT
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS14183 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS14183-P7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS14183P-7 | 0U583 | SAE INTERNATIONAL | | MS14183P-7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS14183-P7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS14183P-7 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | NASM14183 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.439 INCHES MINIMUM AND 0.807 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 5597 ASSN STD SINGLE MATERIAL RESPONSE AND AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | SPECIAL TEST FEATURES | "P" AFTER DASH NUMBER IS DESIGNATED FOR FINISH CODE AS CADMIUM PLATE | | SPECIFICATION/STANDARD DATA | 96906-MS14183 REV. B GOVERNMENT STANDARD | | SPECIAL FEATURES | RECESS DIAMETER: 0.539 IN. MIN. AND 0.549 IN. MAX.;RECESS ANGLE: 90.0 DEG. NOM.;STYLE DESIGNATOR: RECESSED | | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | | THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
|
|