|
|
|
National Stock Number:
5310-01-469-5499
Federal Supply Class:
5310
National Item Identification Number:
014695499
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 250-0027-320 | 10941 | CARVER PUMP COMPANY | | A-200-NGC-0-09-320 | 10941 | CARVER PUMP COMPANY | | F-NGC-0-99-029 ITEM NO 57 | 10941 | CARVER PUMP COMPANY | | NGD-099-009 | 10941 | CARVER PUMP COMPANY | | B18.22.1 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | A-250-0027-320 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | NGD-099-009 PIECE 19 | 10941 | CARVER PUMP COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY R-405 OVERALL OR NICKEL ALLOY 400 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.000 INCHES NOMINAL | | THICKNESS | 0.063 INCHES NOMINAL |
|