|
|
|
National Stock Number:
5310-01-470-9718
Federal Supply Class:
5310
National Item Identification Number:
014709718
Description:
WASHER,FLAT
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS14183 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS14183P-C7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM14183 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS14183P-C7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MS14183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HOLE DIAMETER | 0.439 INCHES MINIMUM AND | | 0.443 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.807 INCHES MINIMUM AND | | 0.817 INCHES MAXIMUM | | OVERALL HEIGHT | 0.071 INCHES MINIMUM AND | | 0.085 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | | SPECIAL FEATURES | RECESS DIAMETER: 0.539 IN. MIN. AND 0.549 IN. MAX.;STYLE DESIGNATOR: RECESSED |
|
|