|
|
|
National Stock Number:
5310-01-472-8879
Federal Supply Class:
5310
National Item Identification Number:
014728879
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2640-808X01 PC | 96169 | ELECTRIC BOAT CORPORATION | | 2640-808X01 PC 48 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 845-4687600 ITEM 33 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2640-808X1 | 96169 | ELECTRIC BOAT CORPORATION | | 264080801-0048 | 96169 | ELECTRIC BOAT CORPORATION | | 2642-820-06 ITEM 33 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| MATERIAL | PLASTIC ACETAL OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.781 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.969 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.062 INCHES NOMINAL |
|