4730-01-473-3679 REDUCER,TUBE Index 1377-01-473-3681 SHAPED CHARGE ASSS

National Stock Number:
5310-01-473-3680

Federal Supply Class:
5310

National Item Identification Number:
014733680

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
1-17/32ID X 2-1 /2OD X 1/16THKD9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
124-4322648 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4322649 PC 1153711NAVAL SEA SYSTEMS COMMAND
124-4322651 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4322652 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4365872 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4366739 PC 1053711NAVAL SEA SYSTEMS COMMAND
124-4399311 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4637387 PC 853711NAVAL SEA SYSTEMS COMMAND
124-4639027 PC 853711NAVAL SEA SYSTEMS COMMAND
124-5589896 PC 853711NAVAL SEA SYSTEMS COMMAND
124-5589897 PC 853711NAVAL SEA SYSTEMS COMMAND
124-6293625 PC 853711NAVAL SEA SYSTEMS COMMAND
124-6293626 PC 953711NAVAL SEA SYSTEMS COMMAND
124-6294787 PC 953711NAVAL SEA SYSTEMS COMMAND
432264853711NAVAL SEA SYSTEMS COMMAND
463738753711NAVAL SEA SYSTEMS COMMAND
463902753711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
OVERALL DIAMETER2.500 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.062 INCHES NOMINAL
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.531 INCHES NOMINAL
PERIPHERAL SHAPE STYLEROUND


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us