3040-01-473-9110 CYLINDER ASSEMBLY,ACTUATING,LINE Index 5950-01-473-9112 TRANSFORMER,POWER

National Stock Number:
5310-01-473-9111

Federal Supply Class:
5310

National Item Identification Number:
014739111

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
124-4322644 PC 4753711NAVAL SEA SYSTEMS COMMAND
124-4322648 PC 2153711NAVAL SEA SYSTEMS COMMAND
124-4322649 PC 3253711NAVAL SEA SYSTEMS COMMAND
124-4365872 PC 2553711NAVAL SEA SYSTEMS COMMAND
124-4366739 PC 2753711NAVAL SEA SYSTEMS COMMAND
124-4367407 PC 4953711NAVAL SEA SYSTEMS COMMAND
124-4399311 PC 2453711NAVAL SEA SYSTEMS COMMAND
124-5588671 PC 4653711NAVAL SEA SYSTEMS COMMAND
124-5589896 PC 2353711NAVAL SEA SYSTEMS COMMAND
124-5589897 PC 1853711NAVAL SEA SYSTEMS COMMAND
124-6293626 PC 2553711NAVAL SEA SYSTEMS COMMAND
124-6294787 PC 2553711NAVAL SEA SYSTEMS COMMAND
432264453711NAVAL SEA SYSTEMS COMMAND
432264853711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER1.2812 INCHES NOMINAL
OVERALL DIAMETER1.750 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-22698 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.1875 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us