|
|
|
National Stock Number:
5310-01-474-6338
Federal Supply Class:
5310
National Item Identification Number:
014746338
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2277-13617 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 2277-13617-03 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.093 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 CRES 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.055 INCHES NOMINAL | | MATERIAL | STEEL COMP 303 OVERALL | | RECESS ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.179 INCHES MINIMUM AND 0.189 INCHES MAXIMUM | | SPECIAL FEATURES | FIRST END CHAMFERED,FROM END 0.015 IN. UP,AT 45.0 DEGREE ANGLE | | STYLE DESIGNATOR | RECESSED | | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE IV FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|