|
|
|
National Stock Number:
5310-01-474-6426
Federal Supply Class:
5310
National Item Identification Number:
014746426
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4M36 | 76301 | THE BOEING COMPANY | | 4M36-11013 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | OVERALL DIAMETER | 1.803 INCHES MINIMUM AND 1.823 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 ANNEALED FED SPEC 2ND MATERIAL RESPONSE OR MIL-S-8506,TYPE 1,ANNEALED MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.090 INCHES NOMINAL |
|
|