|
|
|
National Stock Number:
5310-01-486-2861
Federal Supply Class:
5310
National Item Identification Number:
014862861
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 122-5589566 PC 15 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 122-5589568 PC 13 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5589568 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 2.062 INCHES NOMINAL | | OVERALL DIAMETER | 3.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22698,GR B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL UNS K02102 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | TWO HOLES 180 DEGREES APART DRILLED THRU,DIA 0.375 IN. NOM.,CENTER OF HOLES 0.375 IN. NOM. FROM TOP SURFACE | | THICKNESS | 0.750 INCHES NOMINAL |
|
|