|
|
|
National Stock Number:
5310-01-486-5804
Federal Supply Class:
5310
National Item Identification Number:
014865804
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 124-4322651 PC 105 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 124-4365530 PC 24 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 124-4366739 PC 121 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 124-5794558 PC 36 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.002 INCHES MAXIMUM | | OVERALL DIAMETER | 1.495 INCHES MINIMUM AND 1.497 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.062 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
|
|