|
|
|
National Stock Number:
5310-01-487-7451
Federal Supply Class:
5310
National Item Identification Number:
014877451
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1674M68 | 07482 | GENERAL ELECTRIC COMPANY | | 1674M68P03 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | HOLE WIDTH ACROSS FLATS | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | LENGTH | 2.110 INCHES MINIMUM AND 2.130 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5536 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY UNS N06002 OVERALL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | WIDTH ACROSS FLATS | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | THICKNESS | 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
|
|