|
|
|
National Stock Number:
5310-01-490-4418
Federal Supply Class:
5310
National Item Identification Number:
014904418
Description:
WASHER,FLAT
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS14183L-C9 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS14183L-C9 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM14183 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.584 INCHES MINIMUM AND 0.588 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS559 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5597 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | SPECIAL FEATURES | RECESS ANGLE: 44.0 DEG. MIN. AND 46.0 DEG. MAX.;STYLE DESIGNATOR: RECESSED | | THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
|
|