|
|
|
National Stock Number:
5310-01-494-6556
Federal Supply Class:
5310
National Item Identification Number:
014946556
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 98025A035 | 39428 | MCMASTER-CARR SUPPLY CO | | 98025A035 | 4TU30 | ACCURATE MANUFACTURED PRODUCTS GROUP INC | | Z9276 | 4TU30 | ACCURATE MANUFACTURED PRODUCTS GROUP INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.656 INCHES NOMINAL | | OVERALL DIAMETER | 1.312 INCHES NOMINAL | | MATERIAL | STEEL COMP 1044 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1049 OR STEEL COMP 1050 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | ZINC AND DICHROMATE OVERALL | | THICKNESS | 0.206 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
|
|