|
|
|
National Stock Number:
5310-01-498-5817
Federal Supply Class:
5310
National Item Identification Number:
014985817
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5HP71239-113 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM | | INSIDE LEFT CORNER CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 15-5PH-H1025 STAINLESS STEEL ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM | | THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
|
|