|
|
|
National Stock Number:
5310-01-499-9976
Federal Supply Class:
5310
National Item Identification Number:
014999976
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| HP973210-1 | 24176 | TELEDYNE INC | | HP973210-1 | 70236 | TACTAIR FLUID CONTROLS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.758 INCHES MAXIMUM | | OVERALL DIAMETER | 1.235 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303SE OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.078 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
|
|