|
|
|
National Stock Number:
5310-01-507-3628
Federal Supply Class:
5310
National Item Identification Number:
015073628
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 752-7068430-18 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H832-0370-18 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.500 INCHES NOMINAL | | BOSS THICKNESS | 0.001 INCHES NOMINAL | | BOSS DIAMETER | 0.500 INCHES NOMINAL | | COUNTERBORE DIAMETER | 0.540 INCHES NOMINAL NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | SQUARE NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION C | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B150 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | ALUMINUM ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | NUT DIAMETER | 1.500 INCHES MAXIMUM | | NUT LENGTH | 1.630 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | BOSS DOES NOT EXIST--SLEEVE IS THREADED COMPLETELY THROUGH; OVERALL SHAPE IS RECTANGULAR (1.0 INCHES LONG X 1.5 INCHES WIDE X 1.063 INCHES HIGH) WITH INTERSECTING HOLE PLACED CENTERED ALONG THE 1.0 INCH SIDE AND AT 1.125 INCHES FROM BASE | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 13 |
|
|