|
|
|
National Stock Number:
5310-01-507-3996
Federal Supply Class:
5310
National Item Identification Number:
015073996
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 021-16786-003 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 021-16786C003 | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC | | 477-05524-000 ITEM 46 | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.405 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | III SUPPLEMENTARY FEATURES | DRAWING CALLS THIS: WASHER, PLAIN, HARDENED | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND CIRCULAR SHAPE | | OVERALL DIAMETER | 0.813 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | AASTM F 436 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION | | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|