|
|
|
National Stock Number:
5310-01-509-2521
Federal Supply Class:
5310
National Item Identification Number:
015092521
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 6394396-5 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6394396-5 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6395396-5 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | BEARING SURFACE TYPE | CHAMFERED | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, FORM 1/2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY K-500 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT HEIGHT | 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, HEX, DRILLED, K-MONEL | | SPECIAL FEATURES | HOLES ARE DRILLED ACROSS 3 ALTERNATING CORNERS, CENTERED 0.050 - 0.070 INCH FROM CORNER; MARKED "SOC" ON ONE FLAT EDGE PER DRAWING | | WIDTH ACROSS FLATS | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 16 |
|
|