|
|
|
National Stock Number:
5310-01-509-6770
Federal Supply Class:
5310
National Item Identification Number:
015096770
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 6393450-6 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393450-6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047,T1 6AL-4V MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | WIDTH | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AAMS2488B MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-85614 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.063 INCHES NOMINAL |
|
|