|
|
|
National Stock Number:
5310-01-511-3327
Federal Supply Class:
5310
National Item Identification Number:
015113327
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12387279-13 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | OVERALL DIAMETER | 0.868 INCHES MINIMUM AND 0.905 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A569, ANY TEMPER ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | IN ACCORDANCE WITH MS27183, CARBON STEEL EXCEPT FOR PROTECTIVE FINISH: MIL-STD-171, 1.9.2.2 WHICH IS: ELECTRODEPOSITED ZINC, ASTM B633, TY II, WITH SUPPLEMENTARY CHROMATE TREATMENT, NORMAL COLOR, NOT BLEACHED OR CLEAR; CLASS 2, 0.0005 INCH (13UM) THICK | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, 1.9.2.2 MIL STD 1ST TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THICKNESS | 0.064 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
|
|