|
|
|
National Stock Number:
5310-01-513-5319
Federal Supply Class:
5310
National Item Identification Number:
015135319
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4397005-004 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 4397005-004 | 54786 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 4397005-004 | 6W728 | BAE SYSTEMS SURVIVABILITY SYSTEMS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A109, COLD ROLLED NO. 4 TEMPER ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1008 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1010 OVERALL OR STEEL COMP 1011 OVERALL OR STEEL COMP 1012 OVERALL OR STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.312 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633, TYPE 1, CLASS FE/ZN8 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.032 INCHES NOMINAL |
|
|