|
|
|
National Stock Number:
5310-01-542-8077
Federal Supply Class:
5310
National Item Identification Number:
015428077
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1000553 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 10018860 | 61C19 | MIL-COTS CORPORATION | | 95601A360 | 56664 | MERITOR SPECIALTY PRODUCTS LLC |
|
Techincal Specification:
| MATERIAL | PLASTIC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.562 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.028 INCHES MINIMUM AND | | 0.034 INCHES MAXIMUM | | COLOR | RED OVERALL | | SUPPLEMENTARY FEATURES | MAXIMUM TEMP: 230 DEG F; SCREW SIZE: 9/16" | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER |
|
|