|
|
|
National Stock Number:
5310-01-548-0263
Federal Supply Class:
5310
National Item Identification Number:
015480263
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10014868 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 10018893 | 61C19 | MIL-COTS CORPORATION | | 12759-00357 | 0Y3H3 | FASTENAL COMPANY | | 3005939 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 3011683 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 3005939 | 2J909 | BOWMAN DISTRIBUTION | | 33865 | 0Y3H3 | FASTENAL COMPANY | | 33865 | 5YPU3 | GULF PRODUCTS & SERVICES |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.875 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 2.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.160 INCHES NOMINAL | | SPECIAL FEATURES | 7/8 INCH USS THRU HARD HIGH STRENGTH FLAT WASHER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, FLAT |
|
|