|
|
|
National Stock Number:
5310-01-549-7554
Federal Supply Class:
5310
National Item Identification Number:
015497554
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10018911 | 61C19 | MIL-COTS CORPORATION | | 12759-00367 | 0Y3H3 | FASTENAL COMPANY | | 43985 | 05573 | BARNES GROUP INC. | | 34880 | 0Y3H3 | FASTENAL COMPANY | | 3001182 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 13.0 MILLIMETERS NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 24.0 MILLIMETERS NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | THICKNESS | 3.3 MILLIMETERS NOMINAL | | SPECIAL FEATURES | 12MM ID X 24MM OD: DIN 6916 STRUCTURAL FLAT WASHER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER FLAT M12 |
|
|