|
|
|
National Stock Number:
5310-01-550-0911
Federal Supply Class:
5310
National Item Identification Number:
015500911
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AEW26X37N000EA1LX1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEW26X37N000EA1LXA | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | W221NACN037NN053NNPF | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1005 AND | | STEEL COMP 1006 AND | | STEEL COMP 1008 AND | | STEEL COMP 1009 AND | | STEEL COMP 1010 AND | | STEEL COMP 1011 AND | | STEEL COMP 1012 AND | | STEEL COMP 1013 AND | | STEEL COMP 1015 AND | | STEEL COMP 1016 AND | | STEEL COMP 1017 AND | | STEEL COMP 1018 AND | | STEEL COMP 1019 AND | | STEEL COMP 1020 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAE AMS-QQ-P-416, TY II, CL 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.401 INCHES MINIMUM AND | | 0.421 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.727 INCHES MINIMUM AND | | 0.749 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.056 INCHES MINIMUM AND | | 0.071 INCHES MAXIMUM |
|
|