|
|
|
National Stock Number:
5310-01-558-6542
Federal Supply Class:
5310
National Item Identification Number:
015586542
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10823-04668 | 0Y3H3 | FASTENAL COMPANY | | 3557868 | 45152 | OSHKOSH CORP | | 3557868 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM F436 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM | | WIDTH | 1.350 INCHES MINIMUM AND 1.413 INCHES MAXIMUM | | THICKNESS | 0.097 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
|
|