|
|
|
National Stock Number:
5310-01-625-2012
Federal Supply Class:
5310
National Item Identification Number:
016252012
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 94387 | 07609 | NAVAL SURFACE WARFARE CENTER DAHLGREN DIV |
|
Techincal Specification:
| THREAD QUANTITY PER INCH | 4 | | THREAD SERIES | UN | | UNDERCUT THICKNESS | 1.200 INCHES NOMINAL | | DRILLED HOLE DIAMETER | 0.3125 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE THREAD QUANTITY PER INCH | 18 | | HOLE TYPE AND QUANTITY | 3 TAPPED | | LUBRICATION | DRY FILM LUBRICANT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, COLLET, GUN BOX | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 5.750 INCHES | | NUT DIAMETER | 6.000 INCHES NOMINAL | | NUT STYLE | ROUND | | SPECIAL FEATURES | TENSILE STRENGTH 160-180KSI | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-16232, TY Z, CL III MIL SPEC 1ST TREATMENT RESPONSE AND MIL-L-46010 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND |
|
|