|
|
|
National Stock Number:
5310-12-124-3860
Federal Supply Class:
5310
National Item Identification Number:
121243860
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 5310PL0941430 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 856.8855 | H7701 | CARGOTEC HOLDING NETHERLANDS B.V. | | DIN934-M12-CU2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN934-M12-CU3 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN934-M12-CUZN | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN934-M12-MS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN934M12MS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M12DIN934-MS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M12DIN934MMS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M12DIN934MS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| THREAD SERIES | ISO M | | BEARING SURFACE TYPE | CHAMFERED | | COUNTERSINK ANGLE | 120,0 DEGREES NOMINAL THREADS | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN267/18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | NOMINAL THREAD SIZE | 12,0 MILLIMETERS | | NUT HEIGHT | 9,64 MILLIMETERS MINIMUM AND 10,00 MILLIMETERS MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 18,67 MILLIMETERS MINIMUM AND 19,00 MILLIMETERS MAXIMUM | | TEST DATA DOCUMENT | D8286-DIN934/JUL82/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH IN MILLIMETERS | 1,75 | | THREAD TOLERANCE CLASS | 6H INTERNAL |
|
|