|
|
|
National Stock Number:
5310-14-205-7787
Federal Supply Class:
5310
National Item Identification Number:
142057787
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1155 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | 440003 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | 57080-400-1 | F0216 | JAEGER ETS | | 613-556-043-0 | F0301 | SNECMA MOTEURS GROUPE SNECMA | | 44003 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | 440003 | F6137 | SAFRAN LANDING SYSTEMS | | Z730000 | F0057 | THALES SIX GTS FRANCE SAS | | JECA030U | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E27611E30CAU | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | JEACA030U | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | 620-850-226-0 | F0301 | SNECMA MOTEURS GROUPE SNECMA | | Z3UZ3CN18-08 | F1549 | ARTUS | | R0NDELLE Z,3U/Z3CN18-10 | F3033 | DIRECTION CENTRALE DU MATERIEL DE L'ARMEE DE L'AIR DCMAA | | 620-850-226-0 | F6310 | ELECMA DIVISION ELECTRONIQUE DE LA SNECMA |
|
|
|
|