|
|
|
National Stock Number:
5310-14-229-8119
Federal Supply Class:
5310
National Item Identification Number:
142298119
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 23111CA100 | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | 23111CA100 | F0188 | BLANC AERO INDUSTRIES - GROUPE LISIAEROSPACE | | 23111CA100 | F0236 | SAINT CHAMOND GRANAT SA | | 23111CA100 | F0434 | ALIGN AEROSPACE FRANCE SAS | | 23111CA100 | F1236 | PREAULT TECHNOLOGIES | | 23111CA100 | F4871 | LEFEBVRE STE DES ANCIENS ETS PAUL SA | | L2311-100CA | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | 401537 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | 273194 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | 3040-194 | F1688 | GOODRICH ACTUATION SYSTEMS SAS VERNON | | 3040-194 | F6103 | LUCAS FRANCE SA DIV AEROSPACE FRANCE | | 273194 | F6137 | SAFRAN LANDING SYSTEMS | | 23111CA100 | F6760 | DEMAT SA | | 23111CA100 | F7411 | MECAERO ARCONIC FASTENING SYSTEMS AND RINGS TOULOUSE | | L23111-100CA | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | L23111-100CA | KCF40 | ANIXTER LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | 1 | | CROSS-SECTIONAL SHAPE STYLE | 1 | | HEAT TREATMENT | AS FABRICATED | | MATERIAL | STEEL COMP Z3CN18-10 | | PERIPHERAL SHAPE STYLE | 1 | | MINIMUM TENSILE STRENGTH | 440.0 NEWTONS PER SQUARE MILLIMETER | | MINIMUM YIELD STRENGTH | 170.0 NEWTONS PER SQUARE MILLIMETER | | OVERALL DIAMETER | 20.0 MILLIMETERS NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NF L 09-753 CODE PA NATIONAL SPEC SINGLE TREATMENT RESPONSE | | THICKNESS | 2.0 MILLIMETERS NOMINAL |
|
|