5310-14-294-1802, WASHER,FLAT

National Stock Number:
5310-14-294-1802

Federal Supply Class:
5310

National Item Identification Number:
142941802

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

23134CH060	F0111	BUREAU NORMALISATION AERONAUTIQUEESPACE
9996060024	F0228	SAFRAN HELICOPTER ENGINES
L23134-60CH	F0111	BUREAU NORMALISATION AERONAUTIQUEESPACE

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	6.25 MILLIMETERS MINIMUM AND 6.47 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	F0110 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP Z30C13 OVERALL
III MINIMUM TENSILE STRENGTH	880 NEWTONS PER SQUARE MILLIMETER
III MINIMUM YIELD STRENGTH	640 NEWTONS PER SQUARE MILLIMETER
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	9.82 MILLIMETERS MINIMUM AND 10.18 MILLIMETERS MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MA-E27 CODE PA MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THICKNESS	1.13 MILLIMETERS MINIMUM AND 1.27 MILLIMETERS MAXIMUM

Click here to Register for Free 30-day Trial