|
|
|
National Stock Number:
5310-20-003-2679
Federal Supply Class:
5310
National Item Identification Number:
200032679
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1026318-4 | 07217 | HONEYWELL LIMITED | | 1026318-4 | 0SML3 | AERO INTERNATIONAL, LLC |
|
Techincal Specification:
| COLOR | ANY ACCEPTABLE OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 50.0 DUROMETER NOMINAL | | HOLE DIAMETER | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 2BC 515 NEOPRENE,DUROMETER 50, PER MIL-R-3065 (OR EQUIVALENT) ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | RUBBER NEOPRENE OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,NON-METALLIC | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.2000 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | THICKNESS | 0.0300 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
|
|