|
|
|
National Stock Number:
5310-21-878-0740
Federal Supply Class:
5310
National Item Identification Number:
218780740
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 162-395 | 95119 | PAULIN H AND CO LTD A DIVISION OF THE HILLMAN GROUP CANADA ULC | | 2333 | 94223 | SPAENAUR INC DBA SPAENAUR INC. | | 41680 | 52203 | PREMIER INDUSTRIAL CORP PREMIER FASTENER DIV | | W95 | 95119 | PAULIN H AND CO LTD A DIVISION OF THE HILLMAN GROUP CANADA ULC |
|
Techincal Specification:
| HOLE DIAMETER | 0.265 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | OVERALL DIAMETER | 1.250 INCHES NOMINAL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.065 INCHES NOMINAL |
|
|