|
|
|
National Stock Number:
5310-66-150-7819
Federal Supply Class:
5310
National Item Identification Number:
661507819
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5KP117 | 45152 | OSHKOSH CORP | | 5KP117 | 75Q65 | OSHKOSH DEFENSE LLC | | 91004 | Z0655 | THALES AUSTRALIA - BENDIGO LAND & JOINT SYSTEMS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | GREEN OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 10.0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AS 1237 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 20.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | HEAT TREATMENT FOR RELIEF OF HYDROGEN EMBRITTLEMENT TO AS 1789 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AS 1789 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC ALLOY OVERALL | | THICKNESS | 2.0 MILLIMETERS NOMINAL |
|
|