|
|
|
National Stock Number:
5310-99-134-2517
Federal Supply Class:
5310
National Item Identification Number:
991342517
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2077ITEM 4 | K7689 | AXLES LTD | | 5310-029425 | U1278 | MINISTRY OF DEFENCE NAVY | | 7066614 | K4365 | MANITOWOC CRANE GROUP UK LIMITED | | HBY5 | K7689 | AXLES LTD | | M1/4 | K7689 | AXLES LTD | | BS3410 | K7766 | BRITISH STANDARDS INSTITUTION | | XY4 | K7689 | AXLES LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.901 INCHES MINIMUM AND 0.906 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 1449,PART 3B,CS4 HARD (WITHDRAWN) NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM | | THICKNESS | 0.144 INCHES NOMINAL |
|
|