|
|
|
National Stock Number:
5310-99-208-4193
Federal Supply Class:
5310
National Item Identification Number:
992084193
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 336375 | K0160 | LISTER PETTER LTD | | BAA38 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | BAA38 | K0160 | LISTER PETTER LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | BLACK OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 11.00 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS1449 EN1A NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BOTTOM | | SURFACE FINISH | 32.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BS3189 CLASS A1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THICKNESS | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
|
|