|
|
|
National Stock Number:
5310-99-212-7718
Federal Supply Class:
5310
National Item Identification Number:
992127718
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12074424 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | AM 01 09 28004 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 40.00 MILLIMETERS MINIMUM AND 40.50 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PERIPHERAL SHAPE STYLE | ROUND | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | OVERALL DIAMETER | 77.25 MILLIMETERS MINIMUM AND 77.75 MILLIMETERS MAXIMUM | | SURFACE FINISH | 0.8 MICROMETERS BOTTOM | | SURFACE FINISH | 1.6 MICROMETERS OUTER | | SURFACE FINISH | 1.6 MICROMETERS TOP | | SURFACE FINISH | 1.6 MICROMETERS INNER | | THICKNESS | 4.75 MILLIMETERS MINIMUM AND 5.25 MILLIMETERS MAXIMUM |
|
|