|
|
|
National Stock Number:
5310-99-316-3367
Federal Supply Class:
5310
National Item Identification Number:
993163367
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| SUM3992-4 | K5294 | GE AVIATION SYSTEMS LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.130 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 1449 302S25 HARD NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SMITHS INDUSTRIES 0722-568 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.028 INCHES NOMINAL |
|
|