|
|
|
National Stock Number:
5310-99-405-4846
Federal Supply Class:
5310
National Item Identification Number:
994054846
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| B510190 | K0378 | ROLLS-ROYCE PLC | | B510190PM1 | K0378 | ROLLS-ROYCE PLC |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.155 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.273 INCHES NOMINAL | | FLANGE THICKNESS | 0.245 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MSRR7035 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY OVERALL | | NOMINAL THREAD SIZE | 1.000 INCHES | | NUT DIAMETER | 1.340 INCHES MINIMUM AND 1.350 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | SMALL END DIAMETER | 1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM | | SPECIAL FEATURES | 0.0995IN. DIA BY 0.09IN. DEEP HOLES IN ALL DRIVE POINTS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RPS 168 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | SILVER OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNJEF | | UNDERCUT THICKNESS | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
|
|